> For the complete documentation index, see [llms.txt](/llms.txt). This page is also available as markdown at this URL or via `Accept: text/markdown`.

<!-- coalesce-llms-txt-directive -->

The Metadata Editor allows admins and stewards to manage metadata across Catalog assets.

Two types of edits are available:

1. **One-shot bulk edits**
   - Allow you to update metadata on assets that already exist in Catalog. Changes are applied immediately and run once.
   - Example: apply tags to all tables belonging to a specific schema at a given point in time.
   - One-shot bulk edits are available from the **Tables**, **Columns**, **Dashboards**, and **Knowledge** tabs (depending on the type of asset you want to update)
2. **Automations**
   - Allow you to define metadata rules that run automatically when specific events occur. Instead of manually updating metadata each time, you configure a rule once. Catalog then applies the metadata change whenever the configured conditions are met.
   - Example: assign owners when a table is created
   - Automations are available from the **Automations** tab.

| One-shot bulk edits | Automations |
| --- | --- |
| Manual, one-time updates | Automatic, ongoing rules |
| Apply to existing assets | React to configured events |
| Best for immediate cleanup or migration | Best for ongoing governance |

### Automations

Automatically apply metadata changes when specific events occur in Catalog.

An Automation is configured in three steps:

1. Select a **WHEN** trigger
2. Optionally define a **WHERE** filter
3. Configure a **WHAT** action

Together, these define a rule: *When a specific event occurs, apply a metadata change to matching assets.*

<figure><img src="/img/catalog/assets/automation.png" alt="Metadata Editor Automations tab with WHEN trigger, optional WHERE filter, and WHAT action configuration" className="mdImages" /></figure>

## Current Capabilities

This first release introduces one Automation use case:

- Automatically assign owners to newly added tables or dashboards
- Optionally restrict the Automation to specific schemas or folders

Additional triggers, filters, and metadata actions will be introduced in future releases.

### One-shot bulk edits

## For Tables, Dashboards and Knowledge

Actions you can perform in bulk on your assets are:

1. **Owners** - Add owners, use **Replace owner** to update the assignment or assign a **custom ownership label** while keeping the same principal, or remove owners
2. Add tags
3. Certify or uncertify
4. Deprecate or undeprecate

It's a 3-step process:

### Step 1: Select the Tables You Want to Modify

Use the enhanced filtering system with intelligent cascading filters and lineage-based options.

#### Basic Filters

These filters narrow assets by location, tags, and owner:

- **Source, Database, Schema**: Hierarchical selection where database options depend on selected sources, and schema options depend on selected databases
- **Tags**: Filter by existing tags
- **Owner**: Filter by asset owners

#### Advanced Lineage Filters

These filters use lineage to find upstream relationships:

- **Ancestors**: Filter tables by their upstream dependencies using lineage relationships
  - Supports flexible search formats: `database.schema.table` or `database schema table`
  - Case-insensitive search
  - Considers all lineage types: `AUTOMATIC`, `MANUAL_CUSTOMER`, `MANUAL_OPS`, and `OTHER_TECHNOS`

#### Smart Cascading Selection

The **Source > Database > Schema** filters work hierarchically to prevent invalid combinations. When you select a source, only databases from that source appear. When you select databases, only schemas from those databases appear.

#### Lineage-Based Filtering

Use the **Ancestors** filter to find all tables that depend on a specific upstream table. This is perfect for propagating ownership, tags, or other metadata changes downstream through your data lineage.

<figure><img src="/img/catalog/assets/Screenshot 2025-09-05 at 14.51.05.png" alt="Metadata Editor interface displaying a list of tables with columns for Name, Popularity, Owners, Tags, Certified, and Deprecated." className="mdImages" /></figure>

### Step 2: Click on the Action You Want to Perform

After you select assets, use the toolbar to pick the bulk action, such as **Owners**, **Tags**, **Certification**, or **Deprecation**.

<figure><img src="/img/catalog/assets/image (82).png" alt="Edit 7 selected with options: Owners highlighted, Tags, Certification, and Deprecation buttons displayed." className="mdImages" /></figure>

### Step 3: Apply Your Changes

Complete the modal or panel for your chosen action, for example picking owners and confirming **Assign owners**.

<figure><img src="/img/catalog/assets/image (84).png" alt="Modal window titled &quot;Add owners on 7 selected tables&quot; with a dropdown showing &quot;Product team&quot; and buttons for &quot;Cancel&quot; and &quot;Assign owners.&quot;" className="mdImages" /></figure>

Your assets are immediately updated.

### Review Changes on Each Asset

Bulk updates apply to every asset in your selection or filter scope. To confirm what changed, open the **History** tab on individual tables, dashboards, or knowledge pages. **History** lists owners, tags, descriptions, certification, deprecation, and other metadata edits with author and timestamp. See [History][] for the full list of logged change types and governance workflows.

## Assign Custom Ownership Labels in Bulk

When your account uses **custom ownership labels**, existing owner assignments keep the **No label** status until you update them, even after admins create labels under **Account Configuration > Ownership Labels**. The steps here apply the right label while keeping the same owner or team on each asset.

:::warning[No label until you migrate]

If you enable labels but do not update existing rows, owners continue to show as **No label** anywhere Catalog groups or displays ownership by label.

:::

### Before You Begin

Admins create and manage label names under **Account Configuration > Ownership Labels**. You need at least one label before you can assign it from the Metadata Editor.

### How to Apply Labels With Replace Owner

Use **Replace owner** when the accountable person or team stays the same and you only need to set or change the label.

1. Open the **Metadata Editor** for tables, dashboards, or knowledge you plan to update.
2. Use **Owner** filters so the grid lists the assets for one owner, or another scope you intend to change.
3. Select the assets that should receive the same label for that owner.
4. Choose **Replace owner**.
5. Select the **same** owner or team, pick the **ownership label** you need, and confirm.
6. Repeat for other owners or filter scopes until **No label** no longer appears where you expect labeled ownership.

For large result sets, you can use **Select all matching assets** and **Apply All** with the same care you use for other bulk actions. Read [When There Are More Results Than the List Shows][] first so your filters match the assets you intend to change.

After migration, owners appear grouped by label wherever Catalog shows ownership that way. For **new** assignments when labels are enabled, choose a label that matches the relationship you are recording. For what ownership means in Catalog, see [Ownership][].



## Advanced Use Cases

These patterns help when you need the same metadata change across many related assets.

### Propagating Governance Downstream

The **Ancestors** filter is particularly powerful for data governance workflows.

#### Same Owner on Downstream Tables

You have a core customer table `prod.core.customers` and want to assign the same owner to all downstream tables that depend on it.

1. In the **Metadata Editor**, use the **Ancestors** filter
2. Search for `prod.core.customers` or `prod core customers`
3. All tables with lineage relationships to this table will be displayed
4. Select the tables you want to update
5. Apply ownership changes in bulk

This eliminates the need to manually navigate through lineage tabs for each dependent table.

### Multi-Source Environment Management

The **hierarchical filtering** system makes it easy to work across complex data environments.

#### Tags Across Multiple Snowflake Schemas

You need to tag all tables in specific schemas across multiple Snowflake databases.

1. Select your Snowflake source first
2. Choose the relevant databases. Only Snowflake databases from that source appear.
3. Select the specific schemas. Only schemas from the chosen databases appear.
4. Apply tags to all selected tables

This prevents accidentally selecting tables from the wrong source or invalid database and schema combinations.

## Columns

Actions you can perform in bulk on your assets are:

1. Add, replace, or remove descriptions
2. Add, replace, or remove tags
3. Flag as PII
4. Flag as Primary Key

Columns that share a name often need a shared description. The following video walks through that workflow.



When you run **Apply All** on columns, you use the same **Select all matching assets** flow and limits as for other asset types. Before a large run, read [When There Are More Results Than the List Shows][] for how paging works, how filters set scope, and the maximum number of assets you can include in one operation.

### Bulk Descriptions Workflow

Use the **Ancestors** filter to select downstream tables that depend on a source table, then add or replace descriptions in bulk. This works well when [column description propagation][] doesn't apply, for example columns with transforms or multiple parents.

For initial import of descriptions from a CSV, see [Upload existing descriptions][]. Use the Metadata Editor for ongoing bulk updates after import.

## When There Are More Results Than the List Shows

The Metadata Editor loads a limited number of matching assets at a time, for example the first **500**. When your filters match more assets than appear in the grid, you can still update every matching asset in one operation.

Use **Select all matching assets** to start **Apply All**. Coalesce runs your metadata action against the full filtered set in the **background**, not only the rows you see on the page. While the job runs, watch the Metadata Editor header for progress and status. You can keep working, or check back when the job finishes.

Before you start **Apply All**, remember that filters set the scope for the whole run. Whatever filters are active when you start **Apply All** apply to every matching asset, not only the rows on the page. Narrow or widen filters first so the scope matches what you intend.

### What's Different From Selecting Rows on the Page?

If you are choosing between selecting on the page and **Select all matching assets**, compare these two behaviors:

- Selecting checkboxes on the loaded page updates **only** those visible or selected assets.
- **Select all matching assets** targets **all** assets that match the filter, including those not yet loaded in the grid.

---

[When There Are More Results Than the List Shows]: /docs/catalog/document-your-data/metadata-editor#when-there-are-more-results-than-the-list-shows
[column description propagation]: /docs/catalog/document-your-data/catalog-scribe/column-description-propagation
[Upload existing descriptions]: /docs/catalog/document-your-data/upload-existing-documentation/upload-existing-descriptions
[Ownership]: /docs/catalog/use-cases/document/content-and-context/governance-concepts/ownership
[History]: /docs/catalog/collaborate/history
